Service Bulletin No. 518 D
Inspection of Thermostatic Oil Cooler Bypass Valves
August 16, 2016
All Lycoming engines with thermostatic oil cooler bypass valves: Part number (P/N) 53E19600 (with thermostatic oil cooler bypass valve serial numbers less than 53788), P/N 75944, P/N LW-13230, and P/N 53E19980 (with thermostatic oil cooler bypass valve serial numbers less than 159)
TIME OF COMPLIANCE
At the next oil change, not to exceed 50 hours, then annually thereafter
REASON FOR REVISION
Identified new superseding thermostatic oil cooler bypass valve and updated corrective action after inspection; valve rework/repair is no longer allowed.
This Service Bulletin contains instructions for a mandatory inspection of the crimp nut on the thermostatic oil cooler bypass valve on affected Lycoming engine models. This required inspection is in response to field reports of loose crimp nuts that can drop into the engine and cause engine damage. The required inspection herein ensures that the crimp nut (Figure 1) is securely seated on the shaft.
Find a Service Center
Every Lycoming Service Center can help keep your engine up to date with all Service Bulletins.