Supplement No. 1 to Service Instruction No. 1029 D

  • Publications

On page 7 of 9 of Service Instruction No. 1029D, the first sentence of step 8, should read as follows:  8. Using the same sequence as described in paragraphs 5 and 6, and shown in Figure 12, check all 1/2 inch  nuts for tightness by bringing torque to 600 in. lb. (50 ft. lb.).

Product Support Network

Wherever you are in the world, you have access to exceptional expertise and knowledge about Lycoming engines. Get the most comprehensive customer service and support in the general aviation industry.

Get It Exchanged

Use our Engine Exchange Program to order a new, rebuilt, or overhauled engine to experience more airtime and less downtime.